Wax Melts Buttons | Feels Like Christmas

Safety & Candle Care

Wax Melts

Wax melts should only be used in appropriate wax melt burners. Add one piece of the wax melt pack at a time until your preferred level of melted is reached. Do not overfill the wax melt burner initially as wax will spill over. If wax remains in the burner bowl after use and you wish to remove it, wait until the wax cools and hardens, then apply a small amount of gentle pressure on one end of the wax until it pops out. Do not use metal or sharp objects to clean out wax as this may crack or damage the burner or cause injury. Do not use the wax melt burner if you notice a crack in the glass or ceramic.

Non-electric Wax Melt Burner

Failure to follow these instructions could result in a fire hazard.

Remove all packaging before use.
Do not use if you notice a crack in the glass or ceramic.
Only use with a good quality tea-light. Do not use with a maxi tea-light, votive or other candle.
Keep the wax melt burner and tea-light out of the reach of children and pets.
Do not burn the tea-light or leave the wax melt burner on/near anything that could catch fire.
Never leave a burning candle unattended or move it when lit.
Ensure the wax melt burner is well ventilated. There must be at least 6.5 centimetres of space above the flame within the wax melt burner.
Keep foreign objects out of the wax pool and do not add water or any other substance.
Keep the tea-light wick trimmed to 3-5 millimetres and remove any carbon build up.
The wax melt burner becomes very hot during use, do not touch or move whilst alight.
Extinguish the tea-light if the flame becomes enlarged or begins to smoke.
Use a candle snuffer to extinguish the flame. Once extinguished allow wax melt burner to cool before moving.
Ensure you extinguish the tea-light of the burner before you go to sleep.
Wax melts will eventually lose their scent and the leftover wax should be discarded.

​Direction for Use

Place the wax melt burner on a level, flat, cool, heat resistant surface and away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the wax melt burner is used without a protective plate, tray or similar product.
Position the wax melt on the top bowl of the wax melt burner.
Insert a tea-light in the bottom base of the wax melt burner.
Allow the heat of the tea-light to melt the wax and fragrance to be released into the room. The wax melt burner will become hot while in use – do not touch. Heated wax can also cause burns. Allow the burner to cool completely before touching or moving.
Avoid contact of wax melt contents with eyes and skin, if contact occurs, flush with water. If irritation persists, contact a physician.
Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst a tea-light is still lit. This could cause the wax melt burner to scorch and/or smoke.
Let the wax melt burner completely cool before re-use.
Do not use metal objects to clean out the wax and do not apply pressure when cleaning or removing wax, as this may crack or damage the burner.
Take care not to damage the glass or ceramic.

Electric Wax Melt Burner

Failure to follow these instructions could result in a fire hazard.

Never leave an electric wax melt burner unattended whilst in use.
Do not use if you notice a crack in the glass or ceramic.
Remove all packaging before use.
Keep the electric wax melt burner out of the reach of children and pets.
Do not leave the electric wax melt burner on or near anything that could catch fire.
Ensure the electric wax melt burner is well ventilated.
Keep foreign objects out of the wax pool.
The electric wax melt burner becomes very hot during use, do not touch or move whilst turned on.
Wax melts will eventually lose their scent and the leftover wax should be discarded.

Direction for Use

Place the electric wax melt burner on a level, flat, cool, heat resistant surface and away from other heat sources and flammable objects. If used on a non-heat resistant surface, damage may occur if the electric wax melt burner is used without a protective plate, tray or similar product.
Position the wax melt on the top bowl of the wax melt burner.
Plug in the electric wax melt burner and switch it on.
Allow the heat to melt the wax and fragrance to be released into the room. The electric wax melt burner will become hot while in use – do not touch. Heated wax can also cause burns.
Allow the burner to cool completely before touching or moving.
Avoid contact of wax melt contents with eyes and skin, if contact occurs, flush with water. If irritation persists, contact a physician.
Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst the electric wax melt burner is switched on. This could cause the electric wax melt burner to scorch.
Switch off the electric wax melt burner and unplug from the mains when not in use.
Let the electric wax melt burner completely cool before re-use.
If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens. Apply a small amount of gentle pressure on one end of the wax to pop the wax out.
Do not use metal objects to clean out the wax and do not apply pressure when cleaning or removing wax, this may crack or damage the burner. Take care not to damage the glass or ceramic.